Fitur dan Spesifikasi ICOM IC-F2000
Icom IC-F2000 sangat tipis dengan body tahan terhadap debu dan air sampai pada kedalaman 1m selama 30 menit . Body simple kecil dan tipis membuat handy talky ini sangat mudah digunakan
ICOM IC-F2000 memiliki sensor gerak
Dengan built -in sensor gerak , IC-F2000 posisi dapat dideteksi dengan kemampuan mengirim sinyal darurat pada kondisi bergerak dan tidak bergerak .
ICOM IC-F2000 cocok di lingkungan bising
Speaker ICOM IC-F2000 diameter 36 mm menghasilkan suara sangat clear 800 mW * dilengkapi amplifier BTL memberikan suara kuat sehingga dapat dengan mudah digunakan oleh operator radionya
* Khas dengan speaker internal
ICOM IC-F2000 memiliki pengacak suara
Built -in pengacak suara inversi menyediakan percakapan aman . Sampai dengan 16 kode yang dipilih .
14 Jam beroperasi dan Battery Waterproof / tahan air
Dibuat dari bahan Li – Ion Battery , BP – 279 ( 7.2V DC , 1485mAh ) , menyediakan 14 jam * waktu operasi .
* Tx : Rx : Standby = 5:5:90 . Fungsi Hemat daya ON .
Tenang Stand- by dan Lebih
ICOM IC – F2000 built-in 2 – Tone , 5 – Tone , CTCSS dan DTC dengan kemampuan berkomunikasi dalam group ataupun panggilan dengan pemilihan ID
Fitur MDC berikut diprogram .
PTT ID
Darurat ( ada transmisi ACK )
Radio cek ( RX only)
Stun / Bangkit ( RX only)
Mengirimkan pesan status ( tipe LCD saja)
100 alias tabel ( tipe LCD saja)
Ketika Anda memutar kenop channel , radio akan menyuarakan nomor channel nyaman untuk menyesuaikan channel radio tanpa harus melihat radio .
Fitur lain dari ICOM IC-F2000
8 DTMF kenangan autodial
BIIS PTT ID dan panggilan darurat
” Tombol Shift ” fungsi meningkatkan jumlah tugas kunci yang dapat diprogram
fungsi Surveillance
meningkatnya alarm
Opsional HM – 168LWP , tahan air speaker – mic
SPESIFIKASI ICOM IC-F2000
IC-F2000 |
||||
---|---|---|---|---|
Frequency coverage (Varies according to version) |
USA |
400–470MHz
450–512MHz |
||
EXP |
335–400MHz
400–470MHz 450–520MHz |
|||
Number of channels | IC-F2000 |
16 channels
|
||
IC-F2000T/S |
128 channels
|
|||
Type of emission |
16K0F3E*/11K0F3E
|
|||
Channel spacing |
12.5/25kHz
|
|||
Power supply requirement |
7.5V DC nominal
|
|||
Current drain | Tx High |
1.3A
|
||
Rx | Stand-by |
80mA
|
||
Max. audio (Internal SP) |
300mA
|
|||
Antenna impedance |
50Ω
|
|||
Operating temperature range (Radio specification) |
–30°C to +60°C; –22°F to +140°F
|
|||
Dimensions (projections not included; W×H×D) |
52.2×111.8×24.5mm
2.06×4.4×0.96 in (With BP-279) |
|||
Weight (approx.) |
240g
8.47oz (With BP-279) |
Transmitter
IC-F2000 |
|||
---|---|---|---|
RF output power |
4W, 2W, 1W
(Hi, L2, L1) |
||
Max. frequency deviation (W/N) |
± 5.0kHz/±2.5kHz
|
||
Spurious emissions |
70dB min.
|
||
Frequency stability |
±2.5ppm
|
||
Audio harmonic distortion (W/N) |
.0%/1.5% typ.
(AF 1kHz 40% deviation) |
||
FM Hum and Noise (W/N) |
46/40dB typ.
|
||
Ext. microphone connector |
3-conductor 2.5 (d) mm (1/10ʺ)/2.2kΩ
|
Receiver
IC-F2000 |
|||
---|---|---|---|
Sensitivity (at 12dB SINAD) |
0.25μV typ.
|
||
Adjacent channel selectivity (W/N) |
73/56dB typ.
|
||
Spurious response rejection |
70dB min.
|
||
Intermodulation rejection |
73dB typ.
|
||
Hum and noise (W/N) |
49/43dB typ.
|
||
AF output power (at 5% distortion) |
Internal SP |
800mW typ.(With 12Ω load)
|
|
External SP |
400mW typ.(With 8Ω load)
|
||
Ext. speaker connector |
2-conductor 3.5 (d) mm (1⁄8ʺ)/8Ω
|
FUNCTION COMPARISON AND INTERNAL UNIT OPTIONS
IC-F2000 |
||
---|---|---|
Number of option slots |
–
|
|
CTCSS/ DTCS | encoder |
Available
|
decoder |
Available
|
|
2-Tone | encoder |
Available
|
decoder |
Available
|
|
5-Tone | encoder |
Available
|
decoder |
Available
|
|
DTMF autodial |
Available
|
|
DTMF decoder |
–
|
|
Voice Scrambler | Inversion |
Available
|
Non-rolling |
–
|
|
Rolling |
–
|
|
APCO P25 digital |
–
|
|
6.25kHz digital |
–
|
|
MDC 1200 |
Available (Limited functions)
|
|
Motion function |
Available
|
|
Lone worker function |
Available
|
|
Man down function |
Available
|
|
Intrinsically safe |
–
|
|
Voice announcement |
Available
|
|
Audio compander |
Available
|
|
GPS receiver |
–
|
Applicable U.S. Military Specifications
Icom makes rugged products that have been tested to and passed the following MIL-STD requirements and strict environmental standards.
Standard | MIL-810 G Method, Proc. |
---|---|
Low Pressure Storage |
500.5 I
|
Low Pressure Operation |
500.5 II
|
High Temperature Storage |
501.5 I
|
High Temperature Operation |
501.5 II
|
Low Temperature Storage |
502.5 I
|
Low Temperature Operation |
502.5 II
|
Temperature Shock |
503.5 I-C
|
Solar Radiation |
505.5 I
|
Rain Blowing |
506.5 I
|
Rain Drip |
506.5 III
|
Humidity Induced |
507.5 II
|
Salt Fog |
509.5
|
Dust Blowing |
510.5 I
|
Immersion |
512.5 I
|
Vibration |
514.6 I
|
Shock Functional |
516.6 I
|
Shock Transit Drop |
516.6 IV
|
Also meets equivalent MIL-STD-810 -C, -D, -E and -F.
Ingress Protection Standard IC-F2000 & HM-168LWP | |
---|---|
Dust & Water |
IP67 (Dust-tight and waterproof protection)
|
Standard Paket
- Baterai
- Charger
- Power Adapter
- Antena
- Belt clip
- Manual book
Aksesoris Opsional
-
Baterai
-
Antena
-
Charger & Power
-
Microhone
- HM-168LWP
- HM-159LA
- HM-158LA
-
Belt Clip
Yusof Ishak –
Barang yang dinanti sudah sampai, bisa di nego dan salesnya sangat ramah.
Qistina Enara –
Makasih bosque
Osman Bakar –
Terima kasih seller, barang sudah diterima dengan baik, packing oke, kualitas dan fitur juga oke punya, pokoknya sangat rekomended. Sekali lagi thanks Rakomindo
Mason –
Good service.