Heliax LDF4-50A – Andrew by Amphenol Ex Commscope
Andrew LDF4-50A adalah kabel koaksial seri HELIAX® Low Density Foam untuk transmisi frekuensi radio dengan performa stabil dan redaman rendah. Kabel ini menggunakan konduktor tembaga bergelombang yang dapat menjaga kualitas sinyal untuk jangka panjang.
Bagian isolator kabel heliax ini menggunakan busa dengan massa jenis yang rendah untuk meningkatkan efisiensi transmisi dan mengurangi rugi-rugi sinyal. Lapisan luar kabel dilapisi pembungkus luar polimer hitam tanpa kandungan halogen (halogen free).
Kabel antena dari Amphenol ini dikategorikan sebagai kabel serbaguna untuk penggunaan di luar ruangan. Pemakaian kabel ini sangat cocok untuk instalasi antena, BTS (Base Transceiver Station), sistem radio komunikasi, dan lain-lain.
Perlu diperhatikan bahwa kabel ini bukan tahan api sehingga penggunaan kabel ini difokuskan untuk area luar ruangan sesuai dengan standar instalasi yang berlaku.

Spesifikasi
| Product Classification | |
| Diameter Over Dielectric12.954 mm | 0.51 in |
| Product Type | Coaxial wireless cable |
| Product Brand | HELIAX® |
| Product Series | LDF4-50A |
| Ordering Note | CommScope® standard product (Global) |
| General Specifications | |
| Flexibility | Standard |
| Jacket Color | Black |
| Performance Note | Attenuation values typical, guaranteed within 5% |
| Dimensions | |
| Diameter Over Jacket | 15.875 mm | 0.625 in |
| Inner Conductor OD | 4.826 mm | 0.19 in |
| Outer Conductor OD | 13.97 mm | 0.55 in |
| Nominal Size | 1/2 in |
| Electrical Specifications | |
| Cable Impedance | 50 ohm ±1 ohm |
| Capacitance | 75.8 pF/m | 23.104 pF/ft |
| dc Resistance, Inner Conductor | 1.48 ohms/km | 0.451 ohms/kft |
| dc Resistance, Outer Conductor | 2.69 ohms/km | 0.820 ohms/kft |
| dc Test Voltage | 4000 V |
| Inductance | 0.19 µH/m | 0.058 µH/ft |
| Insulation Resistance | 100000 MOhms-km |
| Jacket Spark Test Voltage (rms) | 8000 V |
| Operating Frequency Band | 1 – 8800 MHz |
| Peak Power | 40 kW |
| Velocity | 88 % |
| Material Specifications LDF4-50A | |
| Dielectric Material | Foam PE |
| Jacket Material | PE |
| Inner Conductor Material | Copper-clad aluminum wire |
| Outer Conductor Material | Corrugated copper |
| Mechanical Specifications | |
| Minimum Bend Radius, multiple Bends | 127 mm | 5 in |
| Minimum Bend Radius, Single Bend | 50.8 mm | 2 in |
| Number of Bends, minimum | 15 |
| Number of Bends, typical | 50 |
| Tensile Strength | 113 kg | 249.122 lb |
| Bending Moment | 3.8 N-m | 33.633 in lb |
| Flat Plate Crush Strength | 2 kg/mm | 111.995 lb/in |
| Environmental Specifications LDF4-50A | |
| Installation temperature | -40 °C to +60 °C (-40 °F to +140 °F) |
| Operating Temperature | -55 °C to +85 °C (-67 °F to +185 °F) |
| Storage Temperature | -70 °C to +85 °C (-94 °F to +185 °F) |
| Attenuation, Ambient Temperature | 20 °C | 68 °F |
| Average Power, Ambient Temperature | 40 °C | 104 °F |
| Average Power, Inner Conductor Temperature | 100 °C | 212 °F |
| Packaging and Weights | |
| Cable weight | 0.22 kg/m | 0.148 lb/ft |









Fitriah Kurniawan –
Lebih mantab dibandingkan marketplace
Mahendra Kusuma –
Pemasangan sesuai yang dijanjikan. Ramah, rapi dan top
Wahyu Nugroho –
Rakomindo memang layak direkomendasikan
Daniel –
Good quality.